Wasp WLS9600 - Good Read Beep Frequency; Good Read Beep Type

ENTER/EXIT PROGRAMMING MODE Good Read Beep Type
Product Reference Guide 69
Good Read Beep Type
Specifies whether the good read beep has a mono or bitonal beep sound.
DEFAULT
Good Read Beep Type = Mono
Good Read Beep Type = Bitonal
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable
from the list below. (Controls the beeper’s pitch/tone.)
Good Read Beep Frequency = Low
Good Read Beep Frequency = Medium
DEFAULT
Good Read Beep Frequency = High