Waters 600e - Summary of Error Messages; Error Message Overview

86 Error Messages, Diagnostics, and Test Procedures
5.1 Summary of Error Messages
This section covers 600 controller:
• Error message overview
• Warning messages
• Shutdown messages
5.1.1 Error Message Overview
The 600 controller displays two types of error messages:
• Warning messages
• Shutdown messages
Warning Messages
Warning messages are informational and may not require action. Warning messages
appear on the 600 controller screen when you:
• Enter an improper value
• Use an unacceptable entry method
Warning messages typically instruct you to correct an error made during programming or
operation of the 600E system. For a list of warning messages and information about
correcting problems, see Section 5.1.2, Warning Messages.
Shutdown Messages
Shutdown messages appear on the 600 controller screen when the 600E pump:
• Exceeds an operator-set limit
• Receives a Stop Flow signal from an external device
All shutdown messages require a user action to resolve. For a list of shutdown messages
and information about correcting problems, refer to Section 5.1.3, Shutdown Messages.