Watlow CLS200 - Page 9

9
List of Tables
Chapter 1: System Overview—12
Table 1.1 — Ordering Options 15
Chapter 2: Installation—19
Table 2.1 — Cable Recommendations 26
Table 2.2 — Power Connections 29
Table 2.3 — Analog Input Connections on TB1 for Four-Loop and Eight-Loop Models 32
Table 2.4 — Analog Input Connections on TB1 for Sixteen-Loop Models 32
Table 2.5 — Digital Output States and Values Stored in the Controller 37
Table 2.6 — Digital Inputs States and Values Stored in the Controller 40
Table 2.7 — TB18 Connections 41
Table 2.8 — TB50 Connections for Four-Loop and Eight-Loop Controllers 42
Table 2.9 — TB50 Connections for Sixteen-Loop Controllers 43
Table 2.10 — EIA/TIA-232 Connections 45
Table 2.11 — RTS/CTS Pins in DB-9 and DB-25 Connectors 45
Chapter 3: Using CLS200—48
Table 3.1 — Bar Graph Display Symbols 51
Table 3.2 — Control Status Symbols on the Bar Graph and Single Loop Displays 52
Table 3.3 — Alarm Type and Symbols 54
Chapter 4: Setup—64
Table 4.1 — Global Parameters 67
Table 4.2 — Job Select Inputs 69
Table 4.3 — Job Selected for Various Input States 69
Table 4.4 — Firmware Option Codes 74
Table 4.5 — Setup Loop Input 74
Table 4.6 — CLS200 Input Types and Ranges 75
Table 4.7 — Input Character Sets 76
Table 4.8 — Input Reading Offset 77
Table 4.9 — Display Formats 79
Table 4.10 — Setup Loop Control Parameters 81
Table 4.11 — Setup Loop Outputs 84
Table 4.12 — Heat / Cool Output Types 85
Table 4.13 — Setup Loop Alarms 90
Table 4.14 — Manual I/O Test 93
Chapter 5: Enhanced Features—96
Table 5.1 — Application Example: Setting Up Process Variable Retransmit 101
Table 5.2 — Application Example: Setting Up Cascade Control 106
Table 5.3 — Application Example: Setting Up Ratio Control 111