Wavetronix SmartSensor HD - Viewing licensing information

Chapter 9: Using Tools
•
101
Setting Description Details
Backup File Allows you to create
a backup file (.ssc) of
the sensor settings
you currently have
configured.
Click the magnifying
glass to navigate to
where you want to
create the backup file;
type a name and hit
OK. Click the Back-up
Sensor Setup button
to save the backup
file to your computer.
This may be useful
if you are making
changes to the
sensor and want
to back up your
configuration before
you do so, so that you
have a known good
configuration to fall
back on if necessary.
Alternatively, it may
be useful if you are
replacing a sensor
in the field, and you
want to quickly apply
the settings from the
old sensor to the new
one.
Restore File Loads a backup file
(.ssc) to the sensor,
replacing the current
sensor configuration
with the configuration
saved to the .ssc file.
Click the magnifying
glass to navigate to
where the desired
backup file is saved;
select it and hit OK.
Click the Restore
Sensor Setup button
to apply the saved
configuration from
the backup file to the
sensor.
This may be useful
if you have made
changes to the
sensor and need to
restore a backed-up
configuration from a
saved file (see above).
Restore Factory
Setup
Sets all sensor
settings back to the
factory defaults.
N/A