Wavetronix SmartSensor HD - Changing Outputs tab settings

46
•
SmartSensor HD User Guide
Changing Outputs tab settings
Figure 47. Outputs tab
Setting Description Details
Source Lets you choose
where SSMHD gets
the traffic data it
reports.
Choose Antenna for
standard use (reports
data as detected by
the sensor). Choose
Diagnostic for testing
and training (creates
simulated traffic).
RF Channel Lets you change
which radio frequency
channel the sensor is
transmitting on.
If you’re using
multiple sensors
within 70 feet of each
other, set each to its
own RF channel.