Wavetronix SmartSensor HD - Page 44

Chapter 5: Configuring Sensor Settings
•
43
Setting Description Details
Orientation Lets you mark which
direction the sensor is
pointing.
Change this if you
think you’ll find it
useful in identifying
the sensor later.
Units Sets whether the
software displays
distances in standard
(mph/feet), metric
(kph/meters), or UK
(mph/meters).
Purely for your
convenience—does
not affect sensor
performance.
Date & Time Shows the date
and time stored
on the sensor’s
internal clock. The
sensor stores time
in Coordinated
Universal Time (UTC)
and doesn’t account
for daylight saving
time. The software
uses the local settings
of the computer it’s
running on to display
the date and time in
local units.
You can change
these or synchronize
the sensor to your
computer.