WEG CFW300 - V;F Type of Control (P202 = 0)

CFW300 | 25
English
First Time Power-Up and Start-Up
5.2.2 V/f Type of Control (P202 = 0)
Seq Display Indication/Action Seq Display Indication/Action
1
2
 Initialization mode
 Press key to enter the first level of the
parameterization mode
 Press keys or to select parameter P202
3
4
 Press key if you need to change the content of
"P202 - Type of Control" for P202 = 0 (V/f)
 Press key to select parameter P401
 If necessary, change the content of parameter
"P401 - Motor Rated Current" according to the
nameplate
 Press key for the next parameter
5
6
 If necessary, change the content of "P402 - Motor
Rated Speed"
 Press key for the next parameter
 If necessary, change the content of "P403 - Motor
Rated Frequency"
Figure 5.3: Sequence for V/f control