Wirepath WPS-300-DVR - Page 58

58
WPS-300-DVR-9CH & 16CH Installation and Users Manual
 •ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and return
to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.” If the contents
in this menu have been modied, a Save dialog box will be displayed requesting the user to save the
changes. Press ENTER on the front panel of the DVR or remote control to exit and save, ESC to exit without
saving. Another method to escape is to use the mouse to “right-click,” and exit the sub menu.
Thefollowingisabriefdescriptionforeachiteminthesubmenuanditsspecicoperations:
Follow the Text Input method described in Section 4.1 to modify these items. Alternatively use the mouse
and the pop-up keyboard to enter these settings. Consultation with the network administrator or the email
provider may be required for these settings.
 •SMTPSERVER
Enter the SMTP mail server name.
 •SMTPPORT
Enter the SMTP Port for e-mail transmission. The default value is 25. The DVR uses TLS for email
authentication. Be sure to check with your email host for their specic TLS port number. The DVR uses TLS for
email authentication. Be sure to check with your email host for their specic TLS port number.
 •AUTHENTICATION
Press ENTER or +/- on the front panel of the DVR or on the remote control to enable or disable this item
depending on whether the SMTP mail server requires authentication. Alternatively use the mouse to
enable or disable this setting.
 •USERNAME
Enter the Username to the email service.
 •PASSWORD
Enter the Password to the email service.
 •MAILFROM
Enter the e-mail address of the associated email account
  NOTE:Thissettingisspecicandmustmatchemailclientsettingsusedtoaccessanemailaccountorthe
  emailfeaturewillnotbeoperable.Donotentergenerictextinthiseld.
 •MAILTO#1-5
The DVR can send e-mails originated from triggered events to up to ve different email addresses.
Enter the appropriate e-mail addresses in these elds.
 •ATTACHMENT
Press +/- buttons on the front panel of the DVR or on the remote to attach a picture from the
corresponding camera to e-mail being sent. Optional picture sizes for the attachment can be set
to Original to match the recorded resolution or QCIF (Quarter CIF is 176 x 144 pixels) to reduce the
size of the attachment. Select N/A to disable attachments.
 NOTE:IftheDVR’sresolutionissettoHalfD1,pictureattachmentsinthee-mailwillappear“squished”
  sincetheDVRreducesthehorizontallinesbyhalf(thereforereducingstoragespaceandbandwidth
  requirements).Thisonlyeffectse-mailsandnotliveorrecorded.h.264playbackvideo.