Factory reset
The Chameleon module can be reset to the same status as when delivered from the factory, apart from the
Software Option that will remain as before factory reset, and the management IP address that will be kept. Go to
the Settings tab, and Maintenance. Click on Factory Reset.
Backup and restore (saving and uploading configuration)
The backup and restore functionality gives you the possibility to save the complete configuration of a Chameleon
to your computer. The stored file is in xml format.
The backup file can be used for e.g. copying configurations between different installations, or keeping a possibility
to upload the original configuration to a Chameleon if you have tested a different configuration.
Additionally, the backup file is useful for support.
Diagnostic file
The diagnostic file is a file containing additional information about the Chameleon module. If you are having
problems with your module, download the diagnostic file and send it together with a description of the problem to
our Support Team (support@wisiconnect.tv).
Terminate Demo
During the trial (Demo) period, all functionality enabled by Software Options are available. If you want to confirm
that the permanent Software Options will support the functionality you are using for your installation, you can
disable the Demo by clicking Terminate Demo.
Please note that the Terminate Demo is irreversible. Demo cannot be activated once it has been terminated.
To Next Page
Loading...
