Xerox 7142 - Page 205

RJ-901C/RJ-900C Maintenance Manual 7 Adjustment
7-7
PF_ENC assembly 1 PF_ENC assembly mounting position
adjustment
"7.11 Media
Sensor Sensitivity
Adjustment" p.7-33
2 PF_ENC inspection "5.4.5 Encoder
Menu" p.5-16
3 Band feed correction "5.5.9 Band Feed
Correction Menu"
p.5-41
4 Top & bottom adjustment "5.5.10 Top and
Bottom Adjustment
Menu" p.5-42
5 Test printing "5.5.12 Test
Printing Menu" p.5-44
Sub platen
assembly
1 Cutter endurance operation check "5.9.7 General
Endurance Menu"
p.5-68
T fence 1 CR encoder inspection "5.4.5 Encoder
Menu" p.5-16
2 Repeatability adjustment "5.5.7
Repeatability
Adjustment Menu"
p.5-35
3 Top & bottom adjustment "5.5.10 Top and
Bottom Adjustment
Menu" p.5-42
4 Test printing "5.5.12 Test
Printing Menu" p.5-44
CR driven pulley 1 CR belt tension adjustment "7.6 CR Belt
Tension Adjustment"
p.7-25
Table 7-1 Adjustment Item List(Continued)
Part replaced or
adjusted
Adjustment
order
Adjustment item Reference