Xerox Color C75 Press - Page 245

049-907
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-908
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-940
Cause: HCS front door fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-941
Cause: Stacker Cart fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-945
Cause: HCS detects Top Tray as always full
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-960
Cause: HCS sensor failure
Remedy: Perform the following:
16-23Xerox
®
Color C75 Press
User Guide
High Capacity Stacker (HCS)