Xerox Color C75 Press - Page 246

Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-964
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-965
Cause: Stacker height limit or full detection fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-966
Cause: Stacker height limit or full detection fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-967
Cause: HCS detects paper still remaining on stacker cart after the front door was
opened/closed.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
• Close the HCS front door.
049-968
Cause: Mix size, stacker full detection fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Remove any paper from the stacker cart.
Xerox
®
Color C75 Press16-24
User Guide
High Capacity Stacker (HCS)