4. Select Save to save the settings and return to the previous window.
Printer Lockout Duration
Set the time from the start to the end of printer lockout. Set the values from 0 to 23
hours and to 59 minutes. If you select Off, no printer lockout occurs.
1. From the Machine Clock/Timers window, select Printer Lockout Duration, and then
select Change Settings.
2. Select Off or On.
3. If you selected On, set the Start and End time by using the arrows, or the numeric
keypad to enter a numeric quantity.
4. Select Save to save the settings and return to the previous window.
Time Zone
1. From the Machine and Clock/Timers window, select Time Zone and then select
Change Settings.
2. Use the arrows to set the time difference from Greenwich Mean Time (GMT).
3. Select Save to save the settings and return to the previous window.
Daylight Savings
With this feature enabled, the machine automatically adjusts the current time when
daylight savings time starts and ends.
Print-On-Demand Duration
1. From the Machine Clock/Timers section, select Print-On-Demand-Duration.
2. Select the desired minutes.
Energy Saver Timers
In energy saving mode, there is a low-power mode and a sleep mode, and when the set
time has elapsed from the last operation on the machine, the machine goes to low-power
mode, then to sleep mode
The Energy Saver Timers feature allows the amount of time specified to elapse before
the machine enters Low Power Mode or Sleep Mode. Options include:
• From Last Operation to Low Power Mode: Specify a time period between the last
operation and entering into the Low Power mode in the range from 1-240 minutes,
in one minute increments.
• From Last Operation to Sleep Mode: Specify a time period between the last operation
and entering into the Sleep mode from 1-240 minutes, in one minute increments.
9-5Xerox
®
Color J75 Press
System Administration Guide
Common Service Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
