EasyManuals Logo

Xerox Color J75 Press System Administration Guide

Xerox Color J75 Press
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
2. Next to FTP client Port Status, select Enabled.
3. Next to Transfer Mode, select either Passive Mode to transfer data over a random
port number specified by the FPT server from a connection made at the printer, or
select Active Mode to transfer data over a fixed, known port from a connection made
at the server.
4. Select Apply.
POP3
Post Office Protocol, version 3 (POP3) allows email clients to retrieve e-mail from remote
servers over TCP/IP on network port 110.
1. In CentreWare, select Properties > Connectivity > Protocols
2. Select POP3 Setup.
3. Type the appropriately formatted address and port number. The default port number
is 110.
4. Next to POP Receive Password Encryption, select APOP Authentication if needed.
5. Type the Login Name assigned to the printer that will be used to log into the POP3
server.
6. Type a password. Retype the password to confirm.
7. Type a Polling Interval value between 1 and 120 minutes. The default value is 10
minutes.
8. Select Apply.
Proxy Server
A proxy server acts as a go-between for clients seeking services and servers that provide
them. The proxy server filters client requests and if the requests conform to the proxy
servers filtering rules, grants the request and allows the connection.
A proxy server keeps any devices behind it anonymous and it decreases the amount of
time needed to access a resource by caching content such as Web pages from a Web
server.
1. In CentreWare, select Properties > Connectivity > Protocols
2. Select Proxy Server.
3. Under General, next to Use Proxy Server, select Enabled.
4. Next to Proxy Setup, select Same Proxy for All Protocols to use the same proxy
settings for HTTP and HTTPs, or Different Proxy for each Protocol.
5. Under Addresses to Bypass Proxy Server, type any web addresses or domains that
you want to bypass the proxy server, such as your companys intranet site.
6. Under HTTP Server, type the Server Name and Port Number. The default port number
is 8080.
7. Next to Authentication, select Enabled if your proxy server is configured to require
authentication, then type a Login name and Password. Retype the password to
confirm.
8. Under HTTPS Server, enter the HTTPS proxy server information if needed.
9. Select Apply.
3-11Xerox
®
Color J75 Press
System Administration Guide
Using CentreWare Internet Services

Table of Contents

Other manuals for Xerox Color J75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color J75 Press and is the answer not in the manual?

Xerox Color J75 Press Specifications

General IconGeneral
Package weight1.000 g
Maximum duty cycle450.000 pages per month
Card reader integrated-
Standard input capacity1.900 sheets
Recommended duty cycle20000 - 75000 pages per month
Page description languagesPCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity1900 sheets
Total output capacity500 sheets
Maximum input capacity5900 sheets
Duplex printingYes
Maximum resolution2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)75 ppm
Scanner typeADF scanner
Maximum scan area297 x 420 mm
Optical scanning resolution600 x 600 DPI
FaxingNo
DisplayLCD
Control typeTouch
Product colorBlack, Blue, White
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv6)TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)- W
Paper tray media typesPlain paper
Paper tray media weight64 - 300 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5
Maximum ISO A-series paper sizeA3
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width1714 mm
Height1372 mm

Related product manuals