11
Connectivity & Network
Setup
In Connectivity & Network Setup, you select the default network settings by which the
machine is connected and communicates to the client PCs and the parameters required
for the communications between the machine and its networked clients.
Note
More detailed settings are available when using CentreWare Internet Services.
1. From the System Settings screen, select Connectivity & Network Setup.
2. Select the item to be set or changed.
Port Settings
Select the interface by which the machine is connected to the client. In Port Settings,
you can set the following items:
Send E-mailLPD
E-mail Notification ServiceNetWare
UPnP DiscoverySMB
WSDIPP
Internet Services (HTTP)EtherTalk
SOAPBonjour
WebDAVPort9100
SNMP
FTP Client
11-1Xerox
®
Color J75 Press
System Administration Guide
To Next Page
Loading...
