E-mail
Scanned documents can be converted into electronic data and sent via e-mail.
Store to Folder
You can scan a document you want to retrieve as electronic data, and store it in a folder.
The document can then be accessed later from any computers on the network.
Scan to PC
When the machine is connected to a network, you can store the scanned data on network
computers using the FTP or SMB protocol. You can scan a document you want to retrieve
as electronic data, and store it on a computer connected to a network.
Store to USB
You can store the scanned data to a USB memory device when you insert the USB 2.0
memory device into the USB memory slot of the control panel of the machine. You can
also select data stored in the USB memory device and print the data directly.
Job Flow Scanning
Using EasyOperator, you can scan a document with a job flow process from a computer
on a network.
Store and Send Link
The machine can convert a scanned document into electronic form, store it on the hard
disk, and send a URL that indicates the location of the document.
Store to Web Services for Devices (WSD)
You can remotely scan the document and store the image on the computer. Using the
operator panel of the machine, you can also select a destination computer on a network
to store the scanned data.
Setting up Access Rights
You can control access to the printer’s services and features by setting up authentication,
authorization, and personalization.
Xerox
®
Color J75 Press7-2
System Administration Guide
Using the Scan Service
To Next Page
Loading...
Need help?
General
Weight and Dimensions
