EasyManuals Logo

Xerox Color J75 Press System Administration Guide

Xerox Color J75 Press
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
Adjust Fold Position (Finisher Adjustment)
Note
The Adjust Fold Position (Finisher Adjustment) is available only when the
Standard/Booklet Maker Finisher is connected to the machine. If the finisher is equipped
with the optional C/Z Folder, additional fold position options become available with the
Adjust Fold Position feature.
Use the Adjust Fold Position (Finisher Adjustment) for adjusting the fold position of
the output. You can adjust the fold position for various paper types, as well as set
adjustment values for a maximum of 10 default types. Furthermore, a set type can be
assigned to each tray. Fold position adjustments can be set for single fold and booklet.
In addition, if the optional C/Z Folder is connected, fold positions can be set for C fold,
Z fold, and Z fold half sheet.
Adjusting the fold position
Note
Adjust Fold Position can be accessed from three separate areas in Common Service
Settings (Tools/administrator mode):
Tools > System Settings > Common Service Settings > Paper Tray Settings >
Custom Paper Settings
Tools > System Settings > Common Service Settings > Paper Tray Settings >
Paper Tray Attributes
Tools > System Settings > Common Service Settings > Maintenance > Finisher
Adjustment
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select one of the following:
Paper Tray Settings > Custom Paper Settings
Paper Tray Settings > Paper Tray Attributes
Maintenance > Finisher Adjustment
6. Select Adjust Fold Position.
7. Select Fold Position Type Setup, and select Change Settings.
8. Select the paper fold position type you want to set or adjust, and select Change
Settings.
9. Select Name and select Change Settings.
10. Enter the desired type name, and select Save.
Note
The recommendation is to use a name such as Single Fold Plain that allows you to
recall what the content of that fold type is.
Xerox
®
Color J75 Press9-34
System Administration Guide
Common Service Settings

Table of Contents

Other manuals for Xerox Color J75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color J75 Press and is the answer not in the manual?

Xerox Color J75 Press Specifications

General IconGeneral
Package weight1.000 g
Maximum duty cycle450.000 pages per month
Card reader integrated-
Standard input capacity1.900 sheets
Recommended duty cycle20000 - 75000 pages per month
Page description languagesPCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity1900 sheets
Total output capacity500 sheets
Maximum input capacity5900 sheets
Duplex printingYes
Maximum resolution2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)75 ppm
Scanner typeADF scanner
Maximum scan area297 x 420 mm
Optical scanning resolution600 x 600 DPI
FaxingNo
DisplayLCD
Control typeTouch
Product colorBlack, Blue, White
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv6)TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)- W
Paper tray media typesPlain paper
Paper tray media weight64 - 300 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5
Maximum ISO A-series paper sizeA3
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width1714 mm
Height1372 mm

Related product manuals