Xerox Color J75 Press System Administration Guide

11. Select the fold type, and select Change Settings.
Note
For details on making each fold adjustment, refer to that specific fold procedure.
12. Select the desired settings, and select Sample Printout.
13. Select the tray in which you loaded paper in step 1, and then press the Start button.
14. Measure the fold position on the output sample, and adjust the fold position
accordingly.
15. Make adjustments to the items if necessary.
16. After you finish making adjustments, print another output sample with Sample
Printout and check the adjustment results.
17. Make adjustments accordingly by repeating the previous steps.
18. Select Save.
19. Select Close until the Adjust Fold Position screen appears.
20. Select the tray in which you loaded paper in step 1, and then press the Start button.
21. Select the adjusted fold position type, and select Save.
22. Continue to select Save or Close until you are returned to the main Tools tab display.
23. Exit administrator mode.
Adjusting the Single Fold position
Note
Adjust Fold Position can be accessed from three separate areas in Common Service
Settings (Tools/administrator mode):
• Tools > System Settings > Common Service Settings > Paper Tray Settings >
Custom Paper Settings
• Tools > System Settings > Common Service Settings > Paper Tray Settings >
Paper Tray Attributes
• Tools > System Settings > Common Service Settings > Maintenance > Finisher
Adjustment
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select one of the following:
• Paper Tray Settings > Custom Paper Settings
• Paper Tray Settings > Paper Tray Attributes
• Maintenance > Finisher Adjustment
6. Select Adjust Fold Position.
7. Select Fold Position Type Setup, and select Change Settings.
8. Select Single Fold, and select Change Settings.
9. Specify Sheets to be folded, and select Sample Printout.
10. Select the tray in which you loaded paper, and press the Start button.
9-35Xerox
®
Color J75 Press
System Administration Guide
Common Service Settings

Xerox Color J75 Press Specifications

General

Package weight	1.000 g
Maximum duty cycle	450.000 pages per month
Card reader integrated	-
Standard input capacity	1.900 sheets
Recommended duty cycle	20000 - 75000 pages per month
Page description languages	PCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity	1900 sheets
Total output capacity	500 sheets
Maximum input capacity	5900 sheets
Duplex printing	Yes
Maximum resolution	2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)	75 ppm
Scanner type	ADF scanner
Maximum scan area	297 x 420 mm
Optical scanning resolution	600 x 600 DPI
Faxing	No
Display	LCD
Control type	Touch
Product color	Black, Blue, White
Market positioning	Business
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv6)	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	- W
Paper tray media types	Plain paper
Paper tray media weight	64 - 300 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3

Weight and Dimensions

Depth	777 mm
Width	1714 mm
Height	1372 mm