Xerox Color J75 Press System Administration Guide

h) Next to Release IP Address, select Enabled if you want the printer to release its
IP address when it restarts.
11. Select Apply.
LPD
The Line Printer Daemon (LPD) protocol is used to provide printer spooling and network
print server functionality for operating systems such as HP-UX
®
, Linux
®
, and MAC OS
X. This section describes the settings available for the LPD feature.
For information on setting up print queues on your client system, refer to your client
system’s documentation.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Click LPD.
3. Type an LPD port number in the Port Number field or use the default of 515.
4. Select the Enable check box to enable the TBCP Filter.
5. Set the Connection Time-Out.
6. Set the Maximum Number of Sessions.
7. Next to TCP-MSS Mode, select Enabled if needed. This setting is common for LPD
and Port 9100.
8. If TCP-MSS Mode is enabled, under IPv4, type the IP Addresses for Subnet 1, 2 and
3.
9. Reflect the values as the machine’s setting values.
a) Click Apply. A screen to enter the user name and password may display.
Note
The default User ID value is admin and password is 1111.
b) The right frame on the web browser will change to the machine reboot display.
c) Click Reboot. The machine will reboot and the setting value will be reflected.
SNMP
Simple Network Management Protocol (SNMP) is used in network management systems
to monitor network-attached devices for conditions that require administrative attention.
It consists of a set of standards for network management including an application layer,
a database schema, and a set of data objects. Agents, or software modules, reside in
the printer’s SNMPv3 engine. A manager is an SNMPv3 management application such
as Open View that is used to monitor and configure devices on the network. The agent
responds to read (GET) and write (SET) requests from the manager and can also generate
alert messages, or Traps, based on certain events.
Xerox
®
Color J75 Press3-8
System Administration Guide
Using CentreWare Internet Services

Xerox Color J75 Press Specifications

General

Package weight	1.000 g
Maximum duty cycle	450.000 pages per month
Card reader integrated	-
Standard input capacity	1.900 sheets
Recommended duty cycle	20000 - 75000 pages per month
Page description languages	PCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity	1900 sheets
Total output capacity	500 sheets
Maximum input capacity	5900 sheets
Duplex printing	Yes
Maximum resolution	2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)	75 ppm
Scanner type	ADF scanner
Maximum scan area	297 x 420 mm
Optical scanning resolution	600 x 600 DPI
Faxing	No
Display	LCD
Control type	Touch
Product color	Black, Blue, White
Market positioning	Business
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv6)	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	- W
Paper tray media types	Plain paper
Paper tray media weight	64 - 300 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3

Weight and Dimensions

Depth	777 mm
Width	1714 mm
Height	1372 mm