EasyManuals Logo

Xerox Color J75 Press System Administration Guide

Xerox Color J75 Press
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
This section describes how to configure settings for SNMP.
Note
When using the CentreWare software to manage the machine by remote control, enable
the SNMP port.
SNMP settings can be configured in CentreWare IS. You can also enable or disable
Authentication Failure Generic Traps on the printer. SNMPv3 can be enabled to create
an encrypted channel for secure printer management.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Click SNMP Configuration.
Note
Another option exists called Enable SNMP v3 Properties. If using this option, configure
HTTPS before configuring SNMP v3. Configuring this feature requires secure web
page communications. Also, SSL must be enabled.
3. Under SNMP Properties, select Enable SNMP v1/v2c or v3) Protocols.
4. Select Apply.
5. Under Authentication Failure Generic Traps, select Enabled for the printer to generate
a trap for every SNMP request that is received by the printer that contains an invalid
community name.
6. Select Apply.
7. To change the SNMP public and private community names from the default values:
a) type a name up to 256 characters for the Community Name (Read only),
Community Name (Read/Write), and Trap Community Name (Trap
Notification).
b) Set the System Administrator's Login ID.
c) Reflect the values as the machines setting values.
d) Click Apply. A screen to enter the user name and password may display.
e) The right frame on the web browser will change to the machine reboot display.
Note
The default User ID value is admin and password is 1111.
f) Click Reboot. The machine will reboot and the setting value will be reflected.
Note
Xerox recommends you change the SNMP v1/v2c public and private community
names for security purposes.
8. To edit SNMP v3 settings:
a) Under SNMP Properties, select Edit SNMP v3 Properties.
3-9Xerox
®
Color J75 Press
System Administration Guide
Using CentreWare Internet Services

Table of Contents

Other manuals for Xerox Color J75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color J75 Press and is the answer not in the manual?

Xerox Color J75 Press Specifications

General IconGeneral
Package weight1.000 g
Maximum duty cycle450.000 pages per month
Card reader integrated-
Standard input capacity1.900 sheets
Recommended duty cycle20000 - 75000 pages per month
Page description languagesPCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity1900 sheets
Total output capacity500 sheets
Maximum input capacity5900 sheets
Duplex printingYes
Maximum resolution2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)75 ppm
Scanner typeADF scanner
Maximum scan area297 x 420 mm
Optical scanning resolution600 x 600 DPI
FaxingNo
DisplayLCD
Control typeTouch
Product colorBlack, Blue, White
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv6)TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)- W
Paper tray media typesPlain paper
Paper tray media weight64 - 300 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5
Maximum ISO A-series paper sizeA3
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width1714 mm
Height1372 mm

Related product manuals