Note
The default time for Low Power mode is 15 minutes. The default time for Sleep mode
is 60 minutes. Ensure that the Sleep mode interval is configured with a longer amount
of time than the Low Power mode time interval.
9. Select Save.
The previous screen is displayed.
10. Select Close.
The main Tools tab screen is displayed.
11. Exit administrator mode.
Exiting power saver mode
The machine exits power saver mode either by pressing the Power Saver button on the
control panel or when it receives print data for an incoming print job.
Xerox
®
Color J75 Press1-4
System Administration Guide
Administrator overview
To Next Page
Loading...
