EasyManuals Logo

Xerox Color J75 Press System Administration Guide

Xerox Color J75 Press
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
Medium: The revocation status of certificates is checked. If the certificate status
cannot be obtained due to a network error, the certificate is still considered valid.
High: The revocation status of certificates is checked. The certificate is only
considered valid after successfully verifying that the certificate has not been
revoked.
3. Under General, select the Retrieval of Certificate Status.
4. If you selected OCSP as the retrieval method, under OCSP, next to Send Query to
OCSP Responder With, select URL as Specified in Certificate or URL as Specified
by Administrator.
5. Type the URL of OCSP Responder
6. Type the OCSP Communication Time-Out (5-60 seconds).
7. If you selected CRL as the retrieval method, under CRL, next to Auto Retrieval of CRL,
select Enabled if desired.
8. Type the CRL Retrieval Time-Out (5-60 seconds).
9. Click Apply to accept the changes or Undo to retain the previous settings.
Secure HTTP and SSL/TLS
You can encrypt all data sent over HTTP by establishing an encrypted SSL connection.
You can enable SSL encryption for the following services:
Configuring the printer in CentreWare IS
Printing from CentreWare IS
Printing using IPP
Managing scan templates
Network scanning
Network accounting
Before you begin:
Install a digital certificate.
Ensure that the date and time configured on the printer is correct. This is used to set
the start time for self signed certificates.
Configuring Secure HTTP and SSL/TLS Settings
A digital certificate must be installed on the printer before you can enable Secure
HTTP. For details, see Installing a Digital Certificate.
If Secure HTTP is enabled, to access CentreWare IS, all pages will contain https:// in
the URL for the Web page.
1. In CentreWare IS, click Properties > Security > SSL/TLS Settings.
2. Next to HTTP - SSL/TLS Communication, select Enabled.
3. Type the port number you want to use for HTTP SSL/TLS.
4. If you want to use SSL/TLS for LDAP communication, select Enabled next to LDAP -
SSL/TLS Communication.
22-19Xerox
®
Color J75 Press
System Administration Guide
Using CentreWare Internet Services for Accounting and Authentication / Security

Table of Contents

Other manuals for Xerox Color J75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color J75 Press and is the answer not in the manual?

Xerox Color J75 Press Specifications

General IconGeneral
Package weight1.000 g
Maximum duty cycle450.000 pages per month
Card reader integrated-
Standard input capacity1.900 sheets
Recommended duty cycle20000 - 75000 pages per month
Page description languagesPCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity1900 sheets
Total output capacity500 sheets
Maximum input capacity5900 sheets
Duplex printingYes
Maximum resolution2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)75 ppm
Scanner typeADF scanner
Maximum scan area297 x 420 mm
Optical scanning resolution600 x 600 DPI
FaxingNo
DisplayLCD
Control typeTouch
Product colorBlack, Blue, White
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv6)TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)- W
Paper tray media typesPlain paper
Paper tray media weight64 - 300 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5
Maximum ISO A-series paper sizeA3
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width1714 mm
Height1372 mm

Related product manuals