Xerox Color J75 Press System Administration Guide

8. Enable PFS if necessary.
9. Type the Specific Destination IPv4 Address.
10. Type the Specific Destination IPv6 Address.
11. To restrict the printer from communicating with devices that are not using IPSec,
select Disabled next to Communicate with Non-IP Sec Device.
12. Click Apply to accept the changes or Undo to retain the previous settings.
802.1X
802.1X is an Institute for Electrical and Electronics Engineers (IEEE) standard that defines
a method for port-based network access control or authentication. In an 802.1X secured
network, the printer must be authenticated by a central authority, typically a RADIUS
server, before it can access the physical network.
You can enable and configure the printer to be used in an 802.1X secured network.
Before you begin:
• Ensure your 802.1X authentication server and authentication switch are available
on the network.
• Determine the supported authentication method.
• Create a user name and password on your authentication server.
• Changing and applying 802.1X settings causes the printer to restart. Ensure that the
printer can be offline for several minutes.
Configuring 802.1X
1. Click Properties > Security > IEEE 802.1X.
2. Next to Enable IEE E 802.1x select Enabled.
3. Under Authentication Method, select the method used on your network. Options are:
• EAP-MD5
• EAP-MS-CHAPv2
• PEAP/MS-CHAPv2
• EAP-TLS: This method is available if the printer is configured to use EAP-TLS.
4. Type the Login Name (Device Name) required by your authentication switch and
server.
5. Type the Password, then retype to verify.
6. Select Enabled next to Certificate Validation if necessary.
7. Click Apply to accept the changes or Undo to retain the previous settings.
Configuring the Printer for 802.1X using EAP-TLS Authentication
1. Create a self-signed certificate.
2. Enable SSL.
3. Click Properties > Security > Machine Digital Certificate Management.
4. Upload a PKI client certificate from a trusted CA.
Xerox
®
Color J75 Press22-22
System Administration Guide
Using CentreWare Internet Services for Accounting and Authentication / Security

Xerox Color J75 Press Specifications

General

Package weight	1.000 g
Maximum duty cycle	450.000 pages per month
Card reader integrated	-
Standard input capacity	1.900 sheets
Recommended duty cycle	20000 - 75000 pages per month
Page description languages	PCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity	1900 sheets
Total output capacity	500 sheets
Maximum input capacity	5900 sheets
Duplex printing	Yes
Maximum resolution	2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)	75 ppm
Scanner type	ADF scanner
Maximum scan area	297 x 420 mm
Optical scanning resolution	600 x 600 DPI
Faxing	No
Display	LCD
Control type	Touch
Product color	Black, Blue, White
Market positioning	Business
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv6)	TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	- W
Paper tray media types	Plain paper
Paper tray media weight	64 - 300 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3

Weight and Dimensions

Depth	777 mm
Width	1714 mm
Height	1372 mm