EasyManuals Logo

Xerox Color J75 Press System Administration Guide

Xerox Color J75 Press
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
23
Problem Solving
Density Uniformity Adjustment/SIQA
problems
If there are problems running or using the Density Uniformity Adjustment feature or
the SIQA application, review the following information and perform the relevant solutions.
The Simple Image Quality Application (SIQA) application on the Windows PC does not
open
Cause: Connection/communication issues between the SIQA application and the
machine.
Remedy: Check the connection between the Windows PC, where the SIQA is installed,
and the machine, and reconnect if necessary.
IP address not found or incorrect
Cause: The system could not locate the IP address or the one found was incorrect.
Remedy: Ensure that the correct machine IP address is entered in the SIQA application?
See through affect on test prints
Cause: Blank sheets of paper were not placed over the test print before scanning it.
Remedy: Place 4-5 sheets of blank, white paper over the test print on the document
glass, then perform the scanning process of the test print.
A Parameter with error message occurs while writing the parameters to the machine.
Cause: Problems with the controller software versions 0.223 and 0.224.
Remedy: From the machines UI, press the Clear All button twice; this should reestablish
communication between the machine and the Windows PC where the SIQA application
is installed. Press Yes on the SIQA application to retry and continue writing the
parameters to the machine.
An Image Check message/screen is displayed while the SIQA application is analyzing
the scanned data
23-1Xerox
®
Color J75 Press
System Administration Guide

Table of Contents

Other manuals for Xerox Color J75 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Color J75 Press and is the answer not in the manual?

Xerox Color J75 Press Specifications

General IconGeneral
Package weight1.000 g
Maximum duty cycle450.000 pages per month
Card reader integrated-
Standard input capacity1.900 sheets
Recommended duty cycle20000 - 75000 pages per month
Page description languagesPCL 5c, PCL 5e, PCL XL, PostScript 3
Total input capacity1900 sheets
Total output capacity500 sheets
Maximum input capacity5900 sheets
Duplex printingYes
Maximum resolution2400 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)75 ppm
Scanner typeADF scanner
Maximum scan area297 x 420 mm
Optical scanning resolution600 x 600 DPI
FaxingNo
DisplayLCD
Control typeTouch
Product colorBlack, Blue, White
Market positioningBusiness
Cabling technology10/100/1000Base-T(X)
Security algorithms802.1x RADIUS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv6)TCP/IP, Novell, NDS, IPX/SPX, IPP AppleTalk, IPP, NetBEUI, DHCP
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (average operating)- W
Paper tray media typesPlain paper
Paper tray media weight64 - 300 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5
Maximum ISO A-series paper sizeA3
Weight and Dimensions IconWeight and Dimensions
Depth777 mm
Width1714 mm
Height1372 mm

Related product manuals