Xerox Copycentre C118 User Manual

Xerox CopyCentre/WorkCentre 118 User Guide 125
9Setups
This chapter, written for the Key Operator, describes how to set up the machine to
change various preset defaults, how to register various items such as mailboxes and
the Address Book, and how to configure or change various Auditron settings.
NOTE: Some features may not be available depending on the machine configuration.
Setups Procedure
Follow the steps below to start changing the default settings, registering items such as
mailboxes and Address Book, and configuring the Auditron settings.
1. Press the <Log In/Out> button on the
control panel.
NOTE: If the Auditron feature is enabled,
press the <J> button to select [System
Settings].
2. Select the required option using the
<Select> button.
System Settings – page 126
Screen Contrast – page 158
Create/Delete – page 158
3. If you selected [System Settings], enter
the correct Key Operator password
using the alphanumeric keypad on the
control panel, and select [Confirm] using
the <Select> button, or press the <Enter> button.
NOTE: The default password is “11111”. To change the password, refer to Change
Password on page 126.
4. Perform the necessary operations.
<Log In/Out> button

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English