2 Product Overview
34 Xerox CopyCentre/WorkCentre 118 User Guide
Power On/Off
Powering On
Ensure that the machine is connected to a suitable power supply and that the power
plug is firmly connected to the electrical outlet. For more information, refer to Electrical
Specifications in the Specifications chapter on page 210.
The machine is ready to make copies about 25 seconds after the power is switched on.
12 <Clear All> Restores the default settings and resume to the first
screen of Copy or Fax.
13 <Stop> Temporarily stops a job.
14 <Error> Indicates that an error occurred.
15 <Start> Starts or resumes a job.
16 <C> Deletes a numeric value or the last letter and symbol
entered.
17 <# (hash)> Shows the symbols entered.
18 <*(asterisk)> Used when you switch the machine to tone.
19 <Enter> Determines any changed settings or entered values.
20 <Exit> Returns to the previous screen without acquiring any
changed settings or entered values.
21 <Collated> Provides a quick way of using the sort feature.
22 <Orig. Type> Provides a quick way of selecting the document type.
23 <Enlarge> Provides a quick way of specifying the enlarge ratio.
24 <Reduce> Provides a quick way of specifying the reduction ratio.
25
<Paper Supply>
Provides a quick way of selecting the paper tray
.
26
<Address Book>
Allows you to select
the destination registered in the Address Book or the program registered in the Fax
Program.
27
<Address Enter/Next>
Allows you to
send a fax or e-mail to multiple destinations at the same time.
28 One Touch panels Displays the number of One Touch buttons. Flip the
panel to access page 1 (001 to 018), page 2 (019 to
036), or page 3 (p01 to p18 for Fax Program).
29 One Touch buttons Specifies Speed Dial or the Fax Program at a single
touch.
Button/Indicator Function
To Next Page
Loading...
Need help?
General