Xerox Copycentre C118 User Manual

9 Setups
160 Xerox CopyCentre/WorkCentre 118 User Guide
Change Recip. Name
*1
Select when changing the registered name. Select [Edit] to display the recipient name
entry field screen, then select [Entry Mode] to switch the character type and enter the
name using the alphanumeric keypad on the control panel.
Change Fax No
Select when changing the registered Fax number.
Change Address
Select when changing the registered E-mail address.
Delete
Select when deleting the registered Speed Dial.
1*:You can also use symbols as well as text and numbers.
Select [Alphabet] for Entry Mode, press the <#> button to display a list of symbols,
then select a symbol using the <Select> button.
Fax Program
This feature allows you to program information about the fax destination and the
features used to send faxes. You can always send faxes using the same conditions of
transmission by recalling the program using One Touch Dial or Speed Dial. In addition
to the information of the fax destination, you can program the following three types of
program. Fax Send, Poll (Polling) Receive, and Post Send that transmits more than one
document at a specified time.
1. Select a program number (p01 to p30) selecting [T] or [S] using the <Select>
button, or select to search a program number using [By Program No.].
2. Press the <Enter> button.
3. Perform the necessary operations.
Program Name
*1
Enter the program name. Select [Edit] to display the Program Name entry field screen,
select [Entry Mode] to switch the character type and enter the name using the
alphanumeric keypad on the control panel.
To change the name, press the <C> button to delete the entered name, and then enter
the new name.
Index
Enter the index used to search the program name in the Address Book.

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English