Xerox Copycentre C118 User Manual

4Fax
76 Xerox CopyCentre/WorkCentre 118 User Guide
Direct Send
Using the document feeder, this feature allows you to start sending a fax immediately
after scanning the first page of documents. This is a useful feature when there is
inadequate available memory on the machine. When you use the feature, the <Direct
Send> green light illuminates.
1. Press the <I> or <J> button to display
[Direct Send] on the Fax screen.
2. Select [Direct Send] using the <Select>
button.
3. Select [On] to enable the feature using
the <Select> button.
Confirm that the <Direct Send> light
illuminates.
NOTE: The <Direct Send> button on the control panel provides a quick way of using
this feature.
2 Sided Originals
When using the DADF, use this feature to specify whether the documents are single-
sided or double-sided, and to specify the orientation of the documents.
1. Press the <I> or <J> button to display
[2 Sided Originals] on the Fax screen.
2. Select [2 Sided] using the <Select>
button.
3. Select the required option.
4. Press the <Enter> button.
1 Sided
Scans single-sided documents.
2 Sided
Scans double-sided documents. When you select this option, the [Originals] screen
displays allowing you to select from the following options.
• Rotate Side 2 Off – Select to scan double-sided documents opened side by side.
• Rotate Side 2 On – Select to scan double-sided documents opened vertically.
<Direct Send> button<Direct Send> light

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English