Xerox Copycentre C118 User Manual

E-mail Features
Xerox CopyCentre/WorkCentre 118 User Guide 93
The Key Operator specifies whether to print out a report when sending e-mail to a
single destination, whether to print out a report when sending e-mail to multiple
destinations, and whether to print out the scanned documents with the report. For more
information about reports, refer to Transmission Report in the Setups chapter on
page 157.
1. Press the <I> or <J> button to display
[Trans. Report] on the E-mail screen.
2. Select [Trans. Report] using the
<Select> button.
3. Select the required option.
4. Press the <Enter> button.
Undelivered
Prints a report only when transmission fails.
OFF
Never prints a report.
On
Always prints a report no matter how the transmission ends.
2 Sided Originals
When using the DADF, use this feature to specify whether the documents are single-
sided or double-sided, and the orientation of the documents.
1. Press the <I> or <J> button to display
[2 Sided Originals] on the E-mail
screen.
2. Select [2 Sided] using the <Select>
button.
3. Select the required option.
4. Press the <Enter> button.
1 Sided
Scans single-sided documents.
2 Sided
Scans double-sided documents. When you select this option, the [Originals] screen
displays allowing you to select from the following options.
• Rotate Side 2 Off – Select to scan double-sided documents opened side by side.
• Rotate Side 2 On – Select to scan double-sided documents opened vertically.

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English