Xerox Copycentre C118 User Manual

9 Setups
152 Xerox CopyCentre/WorkCentre 118 User Guide
Transfer Document
Specify how a received fax is to be processed by the machine.
• Transfer – Forwards a received fax to a specified destination. You can select the
destination fax number from the Address Book. When [Enter Speed Dial] is
selected, you can specify the fax number using the One Touch Dial button, or Speed
Dial code. To complete specifying the fax number, press the <Enter> button.
• Transfer & Print – Forwards a received fax to a specified destination and prints it out
simultaneously. You can select the destination fax number from the Address Book.
When [Enter Speed Dial] is selected, you can specify the fax number using the One
Touch Dial button, or Speed Dial code.
• Print – Prints out a received fax immediately.
F Code
Enter an F Code (up to 20 digits using 0 to 9, *, and #) using the alphanumeric keypad
on the control panel.
Check Password
Specify whether or not to have password control.
Password
Set a password (up to 20 digits using 0 to 9, *, and #) using the alphanumeric keypad
on the control panel.
Delete
Delete the registered F Code.
Local Terminal Information
Use this feature to configure the settings for the line connected to the machine.
Line Type
Select the line type from 10pps, 20pps, and Tone.
NOTE: Changing the line type is not available to some countries.
Fax No.
Enter the fax number of the machine, using the alphanumeric keypad on the control
panel. Press the <C> button to clear the previous value.
Ext./Outside Line

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English