Xerox Copycentre C118 User Manual

4Fax
72 Xerox CopyCentre/WorkCentre 118 User Guide
4. Press the <Enter> button.
Off
Disables the feature.
Sender Name 1
Uses the send header registered to Sender Name 1.
Sender Name 2
Uses the send header registered to Sender Name 2.
Recipient Name
Prints a recipient name which is registered in a Speed Dial, along with a sender name.
This is available only when you dial using Speed Dial, One Touch Dial, or Address
Book.
Transmission Report
With this feature enabled, the machine prints a report at the end of the transmission
that shows the transmission result.
The Key Operator specifies whether to print out a report when sending a fax to a single
destination, whether to print out a report when sending a fax to multiple destinations,
and whether to print out the scanned documents with the report. For more information
about reports, refer to Report Settings in the Setups chapter on page 153.
1. Press the <I> or <J> button to display
[Trans. Report] on the Fax screen.
2. Select [Trans. Report] using the
<Select> button.
3. Select the required option.
4. Press the <Enter> button.
Undelivered
Prints a report only when transmission fails.
Off
Never prints a report.
On
Always prints a report no matter how the transmission ends.

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English