Xerox Copycentre C118 User Manual

3 Copy
52 Xerox CopyCentre/WorkCentre 118 User Guide
1. Press the <Copy> button on the
control panel. Ensure that the
Copy screen is displayed.
2. Press the <Clear All> button
once on the control panel to
cancel any previous selections.
3. Select an option for the
required feature.
If necessary press the <I> or <J> button to switch between screens, and configure
the copy settings. For more information about available Copy features, refer to Copying
Features on page 54.
3. Enter the Quantity
The maximum copy quantity is 99.
1. Use the numeric keypad on the control
panel to enter the number of copies
required. The number entered is
displayed in the upper right-hand corner
of the screen.
NOTE: To cancel an incorrect entry, press the <C> button and enter the correct
quantity.
4. Start the Copy Job
1. Press the <Start> button. Each
document is scanned only once. The
number of copies remaining is displayed
in the upper right-hand corner of the
screen.
<Copy> button
<Clear All> button
<C> button
<Start> button

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English