2 Product Overview
38 Xerox CopyCentre/WorkCentre 118 User Guide
9. Select the required option.
10. Enter the value using the numeric
keypad.
NOTE: You may have to delete the existing value (by choosing <C> on the control
panel) before entering the new value.
11. Press the <Enter> button.
Modes
The mode buttons are used to access the screens which allow you to select features,
monitor the status of jobs and obtain general information about the machine.
There are six mode buttons on the machine:
•Copy
•Fax
•E-Mail
• Log In/Out
• Job Status
• Machine Status
NOTE: Depending on the configuration, there may be three mode buttons on the
machine: <Log In/Out>, <Job Status> and <Machine Status> buttons..
Copy
Use this button to access the Copy function which is used to make copies. The Copy
mode contains three screens which provide access to the many Copy features.
Features such as Reduce/Enlarge, Multiple-Up and Mixed Size Originals are available
to support all of your copying requirements.
<Job Status>
button
<Machine Status>
button
<E-mail> button <Copy> button<Fax> button
<Log In/Out> button
To Next Page
Loading...
Need help?
General