Xerox Copycentre C118 User Manual

Fault Codes
Xerox CopyCentre/WorkCentre 118 User Guide 193
016-790 Insufficient memory for e-mail. Do the following:
• Reduce scanning resolution.
• Decrease the scanning area.
• Add memory to print.
081-702 A fax transmission parameter was wrong. Check the settings of the print
driver.
081-703 There was insufficient memory while transmitting a fax. Split the
document to send, lower the resolution, or delete the unnecessary data
in the memory.
081-704 User cancels the process of the job.
081-705 The feature specified is not available. Check the status of the machine.
081-706,707 An error occurred while using the fax feature. Turn the power off and on
after the screen on the control panel is off.
081-709 A transmission error occurred while using the fax feature. Check the
telephone line and send the document again.
081-720,722 An error occurred in the machine. Turn the power off, and then back on
after the screen on the control panel is off.
081-721 User cancels the process of the job.
C1-3, C2-2, C2-3,
C3-1, C3-2, C3-3,
C4-0, C4-1, C4-2,
C4-3
Paper jam is occurred in the paper tray. Refer to Paper Jams on
page 172.
C6-1, C6-2 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
C8-2, C8-3, C8-4 Paper jam is occurred in the paper tray. Refer to Paper Jams on
page 172.
C8-6 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
C9-3 Paper jam is occurred in Tray 5 (bypass tray). Refer to Paper Jams on
page 172.
E1-6 Paper jam is occurred in the inner of the machine. Refer to Paper Jams
on page 172.
E1-1, E1-2, E3-1 Paper jam is occurred in the exit. Refer to Paper Jams on page 172.
E3-6 Paper jam is occurred in the exit. Refer to Paper Jams on page 172.
E8-2 Paper jam is occurred in the duplex kit. Refer to Paper Jams on
page 172.
Code Description and Corrective Action

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English