241 Scanning
3 Computer Settings
wizard
For Computer only.
Clicking this button opens the wizard screen which guides you
through several steps.
When you complete the steps in the wizard, the settings for Server
Address are automatically configured. For details, click the Help
button.
4 Server Name / IP
Address
Enter a server name or IP address of your computer or the FTP
server that you have shared out.
The following are examples:
• For Computer:
Server name: myhost
IP address: 192.168.1.100
• For Server:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
5 Share Name For Computer only.
Enter the name of the shared folder on the recipient computer.
6 Path For Computer
To store the scanned document in the share folder directly without
creating any subfolder, leave the space blank.
To store the scanned document in the folder you created under the
share folder, enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name:
MyPic, Third-level folder name: John
You should now see MyShare\MyPic\John in your directory.
0
In this case, enter the following item.
Path: \MyPic\John
For Server
Enter the path to store the scanned document.
7 Login Name Enter the user account name that has access to the shared folder on
your computer or FTP server.
8 Login Password Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Server/Computer
feature. Ensure that you have a valid password for the user login
account. (See "Confirming a Login name and Password" on
page 223 for details on how to add a password in your user login
account).
9 Confirm Login
Password
Re-enter your password.
10 Port Number Enter the port number. If you are unsure, you can enter the default
value of 139 for SMB and 21 for FTP.
MyShare (Share folder)
MyPic
John
To Next Page
Loading...
Need help?
General