General Procedures and Information
6-8 04/08 Phaser 3100 MFP
General Technical Characteristics
General
Measurements L-D-H in mm 386 x 447 x 412 (15.1 x 17.6 x 16.2
inches) (3100 MFP/X)
Measurements L-D-H in mm 386 x 447 x 344 (15.1 x 17.6 x 13.5
inches) (3100 MFP/S)
Weight 13 kgs (28.6 lbs) (3100 MFP/X)
Weight 11.6 kgs (25.5 lbs) (3100 MFP/S)
Consumables
Type (for platen and ADF scanners) Inapa tecno SPEED A4 -80 g/m2
Type (for printer) Xerox 75gsm
Document reference (DR)
Type ITU #1 -A4
Black/white ratio 3%
Resolution Normal mode (200 x 100 DPI)
ADF scanner (3100MFP/X only)
Type CIS Colour and B/W
Colour analysis Yes
Resolution in DPI 600
Grey scale 256
Colour scale 36 bits/pixel
Paper size A4 (210 x 297 mm)
• Maximum width 216 mm (8.5 inches)
• Minimum width 145 mm (5.7 inches)
• Maximum length 1 m (39.3 inches)
• Minimum length 120 mm (4.7 inches)
Paper weight 60 to 90 g/m²
Capacity of document feeder 50 pages (80 g/m²)
Effective scanner width 210 mm (8.2 inches)
Zoom in steps of 1% 25% to 400%
Contrast Yes (7 levels)
Brightness Yes (7 levels)
Margin adjustment (left/right) Yes
Origin adjustment Yes
To Next Page
Loading...
