Xerox Phaser 3100MFP - REP 38 Scanner Cover and Document Pad

Repairs and Adjustments
Phaser 3100 MFP 04/08 4-91
REP 38 Scanner Cover and Document Pad
Parts List on: PL 2
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
None.
Removal
Document Pad
1. Open the platen cover.
2. Remove the document pad located under the platen cover, Figure 1.
Figure 1
Platen Cover
3. Lift the platen cover to extract the two hinges from their slots and remove the platen cover.
Replacement
1. Replacement is the reverse of the removal procedure.