Repairs and Adjustments
Phaser 3100 MFP 04/08 4-33
REP 12 Speaker
Parts List on: PL 2
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
• Remove the printer front door assembly and the right side cover, REP 3.
• Remove the CPU shield plate, REP 11.
Removal
1. Disconnect the speaker connector from the CPU board.
CAUTION
Before removing the speaker harness from the ferrite tube make a note of the routing.
2. Remove the speaker connector from its ferrite tube and cable guide, Figure 1.
Figure 1
To Next Page
Loading...
