Repairs and Adjustments
4-28 04/08 Phaser 3100 MFP
REP 10 ADF Sliders and Antistatic Brush
Parts List on: PL 8, PL 9
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
• Remove the feeder assembly, REP 4.
• Remove the ADF document feed assembly, REP 6
• Remove the motor frame REP 8.
Removal
1. Turn the assembly upside down.
2. Remove the 2 mounting screws of the lower cover and remove it, Figure 1.
Figure 1
To Next Page
Loading...
