Xerox Phaser 3100MFP Service Manual

Repairs and Adjustments
4-48 04/08 Phaser 3100 MFP
REP 20 CIS Ribbon Cable
Parts List on: PL 6
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
• Remove the ADF cover, REP 2.
• Remove the front door and the side covers, REP 3.
• Remove the CPU shield plate, REP 11.
• Remove the platen assembly, REP 16
.
Removal
1. Unfold the end of the CIS ribbon cable and remove it from its slot, Figure 1.
Figure 1
2. Slide the CIS ribbon cable out of its ferrite tube which is fixed to the CIS panel and remove it
from the scanner.
3. Remove the CIS ribbon cable from its cable guides located above and below the scanner bot-
tom then slide it to remove it from the scanner bottom.
CAUTION
Note the cable guide position for reassembly.
4. Remove the CIS ribbon cable.

Xerox Phaser 3100MFP Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Capacity	250 sheets
Supported Operating Systems	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Speed (Black)	20 cpm
Print Speed	Up to 20 ppm