Repairs and Adjustments
Phaser 3100 MFP 04/08 4-3
REP 1 Control Panel
Parts List on: PL 1
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
• None.
Removal
1. Unlock the three clips of the front panel (A, B and C), Figure 1.
Figure 1 (3100 MFP/X shown, 3100 MFP/S similar)
2. Pull the panel forward to release it from the two bottom slots (D and E).
To Next Page
Loading...
