Xerox Phaser 3100MFP Service Manual

Image Quality
Phaser 3100 MFP 04/08 3-3
IQ 1 Checking the Quality of Prints and Calibrating the Scanner
To check or improve the quality of prints, you should first calibrate the scanner. Follow this proce-
dure:
1. Press  enter * then A on the keyboard and confirm with OK. The machine reboots.
2. Start making copies of documents on the document glass and check the quality of the copies.
If the problem persists and if it is related to the scanner:
• Repeat the calibration procedure (step 1). If the problem persists and if it is related to the
printer (the scanner still provides unsatisfactory results):
1. Press  then enter 56 on the keyboard. The machine prints the list of printer parameters.
2. Check the printer’s printing and copying parameters.
3. Check the print cartridge.

Xerox Phaser 3100MFP Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Capacity	250 sheets
Supported Operating Systems	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Speed (Black)	20 cpm
Print Speed	Up to 20 ppm