Xerox PHASER 3435 - REP 11 Shield SMPS Assembly

Repairs and Adjustments
4-32 5/08 Phaser 3435
REP 11 Shield SMPS Assembly
Parts List on: PL 1
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
1. Before removing the Shield SMPS Assembly, remove the:
- Side Cover Right, REP 7.
- Duplex Drive Assembly, REP 10.
2. Unplug the two connectors (HVPS, Fuser).
Figure 1
Fuser connector
HVPS connector