Repairs and Adjustments
Phaser 3435 5/08 4-49
REP 20 Feed Roller Parts
Parts List on: PL 6 and PL 7
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
1. Before removing the Feed Roller Parts, remove the:
-Pick Up Roller Assembly, REP 15.
-Duplex Guide Housing, REP 16.
-Cover Mid Front, REP 18.
-MPF Housing, REP 19
.
2. Remove the two screws securing the both side of the Guide Paper and then remove the
Guides.
Figure 1
Guide paper
To Next Page
Loading...
