Xerox PHASER 3435 Service Manual

General Procedures and Information
6-24 5/08 Phaser 3435
• Motor Driving
The main motor driving circuits is on the BLDC Motor Assembly Unit. Main Controller has
the interfacing circuits. There is motor driver IC on the motor control board of Motor
Assembly Unit.
The exit motor driving circuits is formed when the driver IC is selected. The AN44060A
Motor Driver IC is used in this case. The resistance Rs value for sensing and voltage
value for the V reference can be changed by motor driving voltage value. The motor driv-
ing voltage is calculated with the following formula.
The motor driving circuit is formed when the Driver IC is selected. The A3977 Motor Driver
IC is used in this case. The resistance Rs value for sensing and voltage value for the V
reference can be changed by motor driving voltage value. The motor driving voltage is cal-
culated with the following formula.
I = Vref / Rs, wherein Vref is (R1 x 5V) / (R1+R2)
SMPS & HVPS board
The SMPS supplies DC Power to the System.It takes 110V/220V and outputs the +5V, +24V to
supply the power to the main board. The HVPS board creates the high voltage of THV/MHV/Sup-
ply/Dev and supplies it to the developer part for making best condition to display the image. The
HVPS part takes the 24V and outputs the high voltage for THV/MHV/BIAS. The high voltage out-
put is supplied to the toner, OPC cartridge, and transfer roller.
HVPS (High Voltage Power Supply)
• Transfer High Voltage (THV+)
-Input Voltage: 24 V DC 15%
-Output Voltage: MAX +5.0KV 5%,(Duty Variable, no loading)
->1.2KV 15% (when cleaning,200)
-Output Voltage Trigger: 6.5
-Input contrast of the Voltage stability degree: under 5% (fluctuating input 21.6V ~ 26.4V)
Loading contrast: 5% or less
-Output Voltage Rising Time: 100 ms Max
-Output Voltage Falling Time: 100 ms Max
-Fluctuating transfer voltage with environmental various: +650 V(Duty 10%) ~ 5 KV (Duty
90%)
-Environment Recognition Control Method: The THV-PWM ACTIVE is transfer active signal. It
detects the resistance by recognizing the voltage value, F/B, while permits the environmental
recognition voltage.
IN 0, 2 IN 1, 3 Output Current
L L Vref / (10*Rs) = Iout
H L Vref / (15*Rs) = Iout * 2/3
L H Vref / (30*Rs) = Iout * 1/3
H H 0

Xerox PHASER 3435 Specifications

General

Color	No
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Internal memory	64 MB
Sound power level (standby)	25 dB
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	550 sheets
Media weight (tray 1)	60 - 163 gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Network ready	Yes
Authentication method	IP filtering, 802.1x
Power consumption (active)	526 W
Maximum operating temperature range (T-T)	10 - 32 °C
Maximum duty cycle	80000 pages per month
Power consumption (standby)	36 W
Power consumption (PowerSave)	11 W
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Certification	CB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC