EasyManuals Logo

Xerox PHASER 3435 Service Manual

Xerox PHASER 3435
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #214 background imageLoading...
Page #214 background image
General Procedures and Information
6-28 5/08 Phaser 3435
tions)
-Rising Time: within 2Sec
-Falling Time: over 20ms
-Surge: Bi-Wave 3kV Normal, 6KV - Common
Environment Condition
- Operating temperature range: 0 40
- Maintaining temperature range: -25 85
- Preserving Humidity Condition: 30% 90% RH
-Operating atmospheric pressure range: 1atm
EMI Requirement: CISPR,FCC, CE, MIC, C-Tick,
Safety Requirement:IEC950 UL1950, CSA950, C-UL,NOM, TUV, Semko, Nemko, iK, CB,
CCC(CCIB), GOST, EPA, Power Save
Fuser AC Power Control
Fuser (e-coil) gets heat from AC power. The AV power controls the switch with the Triac, a sem-
iconductor switch. The ON/OFF control is operated when the gate of the Triac is turned on/off by
Phototriac (insulting part). In other words, the AC control part is passive circuit, so it turns the heat-
er on/off with taking signal from engine control part. When the HEATER ON signal is turned on at
engine, the LED of PC501 (Photo Triac) takes the voltage and flashes.From the flashing light, the
Triac part (light receiving part) takes the voltage, and the voltage is supplied to the gate of Triac
and flows into the Triac. As a result, the AC current flows in the e-coil, and heat is occurred. On
the other hand, when the signal is off, the PC501 is off, the voltage is cut off at the gate of Triac,
the Triac becomes off, and then the e-coil is turned off.
Triac (Q501) feature: 24A-LV model / 16A-HV model, 600V SWITCHING
Phototriac Coupler (PC501)
-Turn On If Current: 15mA ~ 50mA(Design: 16mA)
-High Repetitive Peak Off State Voltage: Min 600V
Engine F/W
Control Algorithm
Feeding
If feeding from a cassette, the drive of the pickup roller is controlled by controlling the sole-
noid. The on/off of the solenoid is controlled by controlling the general output port or the
external output port. While paper moves, occurrence of Jam is judged as below.

Table of Contents

Other manuals for Xerox PHASER 3435

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox PHASER 3435 and is the answer not in the manual?

Xerox PHASER 3435 Specifications

General IconGeneral
ColorNo
Maximum resolution600 x 600 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)33 ppm
Internal memory64 MB
Sound power level (standby)25 dB
Total input capacity300 sheets
Total output capacity150 sheets
Maximum input capacity550 sheets
Media weight (tray 1)60 - 163 gsm
Paper tray media typesEnvelopes
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Network readyYes
Authentication methodIP filtering, 802.1x
Power consumption (active)526 W
Maximum operating temperature range (T-T)10 - 32 °C
Maximum duty cycle80000 pages per month
Power consumption (standby)36 W
Power consumption (PowerSave)11 W
Operating temperature (T-T)50 - 90 °F
Operating relative humidity (H-H)20 - 80 %
CertificationCB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC

Related product manuals