Configuring the Printer
1. Ensure that your printer is connected to power, to your network, and to the fax line, as needed.
2. Confirm that your printer is recognized on your network.
By default, the printer is assigned an IP address automatically from a DHCP server over a TCP/IP
network. If you have another type of network, or want to assign a static IP address, refer to IP.
Note: Xerox recommends using DHCP reservations to assign IP addresses to your
printers. DHCP reservations provide the most consistent IP addresses and the ability to
connect with the Host Name.
3. Complete the installation wizards. These wizards help you configure basic printer settings such as
your location, time zone, and date and time preferences.
4. To view the current printer configuration, print a Configuration Report.
a. To print a Configuration Report, on the printer control panel, touch
Device→About→Information Pages→Configuration Report.
b. Review the report and locate the printer IPv4 address.
5. To access the Embedded Web Server for the printer:
a. From your computer or network-connected device, open a Web browser.
b. In the Web browser address field, enter the IP address for your printer.
6. In the Embedded Web Server, create a host name for the printer. For details, refer to Configuring
DNS Settings.
Note: To allow users to connect to the printer and print, provide users with the IP
address or host name.
7. To send billing meter and diagnostic information to Xerox, in the Embedded Web Server, configure
remote services. For details, refer to Remote Services and Billing Information.
8. As needed, in the Embedded Web Server, configure the following printer settings.
a. Configure Authentication. For details, refer to Configuring Authentication Settings.
b. Configure Security. For details, refer to Security.
c. Configure the services that you want to appear on the printer control panel. For details, refer
to Selecting Apps to Appear on the Control Panel.
d. Configure features for Copy, Print, Scan, and Fax. For details, refer to Copying, Printing,
Scanning, and Faxing.
e. Configure Accounting. For details, refer to Accounting.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
5
Introduction
To Next Page
Need help?
General
