Xerox VersaLink Series - Page 94

CCoonnffiigguurriinngg FFiilltteerrss ffoorr IIPP AAddddrreesssseess
1. In the Embedded Web Server, log in as administrator, then click System→Security.
2. In the Network Security area, click IP Address Filtering.
3. For IPv4 (LAN), IPv4 (Wi-Fi), IPv6 (LAN), IPv6 (Wi-Fi), to enable a protocol, click the toggle button.
4. To configure filtering for each protocol selected, for Allowed IP Address/Subnet Mask, click Add.
5. For Enter IP Address, type the IP address to filter.
6. For Enter IP Mask, type the number for the mask.
7. Click OK.
8. When finished, click OK.
CCoonnffiigguurriinngg FFiilltteerrss ffoorr DDoommaaiinnss
You can specify up to 50 domains to allow or block.
To configure domain filtering:
1. In the Embedded Web Server, log in as administrator, then click System→Security.
2. In the Network Security area, click Domain Filtering.
3. To allow specific domains, click Allow Specific Domains.
• Enter up to 50 domains to allow.
• To delete domains from the list, click the Trash icon.
4. To block specific domains, click Block Specific Domains.
• Enter up to 50 domains to block.
• To delete domains from the list, click the Trash icon.
5. To disable domain filtering, select Off.
6. When finished, click OK.
NNeettwwoorrkk LLooggss
Log files are text files of recent printer activity that are created and stored in the printer. Log files are
used to monitor network activity or troubleshoot network problems. A Xerox customer support
representative can interpret the encrypted format log files.
94
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Security