Xerox WorkCentre 3119 Service Manual

General Procedures and Information
WorkCentre 3119 06/06 6-33
Machine Test
This option allows the you to perform several tests on the machine. To access this option, enter
Tech mode and press the menu button until ’Machine Test’ appears on the display. Press the en-
ter button and use the W and Xbuttons to scroll between the options available. Press the enter
button to confirm selection. Or, to return to standby mode, press Stop/Clear.
- Switch Test: Use this feature to test all keys on the operation panel. The result is displayed
on the window each time a key is pressed.
- Dram Test
This feature allows the machine’s DRAM to be tested. If all memory is working normally, the
LCD shows <<OK>>
- Pattern Test
This feature allows you to make pattern printouts in order to check the printer’s mechanism.
- Shading Test
This function is used to set the optimum scan quality determined by the characteristics of the
CIS (Contact Image Sensor). Perform this function if copy quality image is poor.
Report
This option allows the you to print the printer’s specifications and settings. To access this option,
enter Tech mode and press the menu button until ’Report’ appears on the display.Press the enter
button and use the W and Xbuttons to scroll between the options available.Press the enter button
to confirm selection. Or, to return to standby mode, press Stop/Clear.
-System Data: Prints the printer’s specifications and settings.
-Error Info: Prints a list of all errors

Xerox WorkCentre 3119 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Print Resolution	600 x 600 dpi
Copy Speed	19 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Memory (Standard)	32 MB
Operating System Compatibility	Windows, Mac