Xerox WorkCentre 3225

June 2014
6-15
Xerox® WorkCentre® 3215/3225 Multifunction Printer Service Manual
GP 4, GP 5
General Procedures and Information
4. Select [Properties] and select from the following menu items to adjust the machine set-
tings.
•Firmware
•System
• Printer
• Copy
•Fax
•Scan
• E-mail Notification
• Network Settings
• Security
GP 5 Altitude Adjustment
Purpose
Print quality is affected by atmospheric pressure, which is determined by the height of the
machine above sea level.
Requirements
• WiFi or Network connection
Procedure
1. Determine altitude of machine placement:
2. Press the <Information> button on the Control Panel to go to Machine Status.
3. Using the up/down arrows, naviagate to: [System Setup].
4. When prompted for the admin password, enter 1111, then <OK>.
NOTE: It may be necessesary to obtain the username and password from the customer if
they have been changed.
5. Using the up/down arrows, naviagate to: [Machine Setup>Altitude Adjustment]. Press
the <OK> button to confirm selections.
6. Select the correct altitude for the placement of the machine. Table 1.
7. Press <OK>.
or
1. Open Easy Printer Manager. Select: [Machine Settings, System Altitude Adjustment].
2. Select correct value from the drop down menu. Table 1. Press <OK>.
Table 1 Altitude Values
Altitude Value
0 - 1000 M
0 - 3,280 ft.
Normal
1000 - 2000 M
3,280 - 6,561 ft.
High 1
2000 - 3000M
6,561 - 9,842 ft.
High 2
3000 - 4000 M
9,842 - 13,123 ft.
High 3
4000 - 5000 M
13,123 - 16,404 ft.
High 4